M6.0 Earthquake near Auckland Islands, New Zealand region — 10 June 2026
A strong earthquake of magnitude 6.0 was recorded near Auckland Islands, New Zealand region on , at a focal depth of 13.7 km.
Time (UTC): 2026-06-10 00:44:21
Time (your timezone): —
Magnitude: 6.0 (strong)
Focal depth: 13.7 km (shallow)
Epicentre: -49.6197, 164.0980
Location: Auckland Islands, New Zealand region
USGS link to NOAA tsunami information: Not linked
Review status: Reviewed
Source: USGS event page
How strong was this earthquake?
Strong earthquakes can cause significant damage in populated areas within roughly 100 km of the epicentre, particularly to older masonry buildings. Landslides and liquefaction become a real risk in susceptible ground.
A magnitude 6.0 earthquake radiates roughly 15,080 tons of TNT equivalent in seismic energy.
The USGS assigns this earthquake a significance score of 554, which is below the USGS threshold of more than 600 for its significant-earthquake list. The ranking combines magnitude with available Did You Feel It responses and PAGER alert level; it is not a direct measurement of damage.
Where was the epicentre?
The epicentre was located at -49.6197, 164.0980. The closest other recorded event was a magnitude 4.6 earthquake 31 km west-southwest of here on 14 July 2025.
Why the 14 km depth matters
At 14 km this was a shallow earthquake. Shallow events release their energy close to the surface, so for a given magnitude they produce noticeably stronger shaking — and more damage — than deeper ones. Roughly three quarters of all earthquakes worldwide occur at shallow depths.
This catalogue does not ingest eyewitness responses, so it cannot confirm where this earthquake was felt. Based on magnitude alone, an event this size can produce strong, widely felt shaking. Its shallow focus makes stronger surface shaking more likely than for a deeper event of the same magnitude.
What does the tsunami information flag mean?
The USGS record does not carry a link to NOAA tsunami information. That field is not an all-clear and does not state whether a tsunami occurred. In this case, a damaging tsunami would be less likely because at M6.0 it falls below the magnitude 6.5 threshold that generally applies before a submarine earthquake displaces enough water to generate a damaging tsunami. For an active coastal alert, use tsunami.gov or your local warning authority.
How earthquakes generate tsunamis, and what the alert levels mean →
Aftershocks and local seismic history
No further earthquakes have been recorded within about 150 km of the epicentre in the seven days after this event.
8 earthquakes of magnitude 4 or above have been logged within roughly 200 km of this epicentre in our catalogue. The strongest was a magnitude 6.2 event near Bluff on 29 April 2025. This M6.0 event released about 2.0 times less energy than that event.
How long aftershock sequences last, and how large they get →
Where this event sits in the record
This earthquake is part of the June 2026 worldwide record. Browse the full monthly archive to compare periods.
Nearest recorded earthquakes to this epicentre
- M4.6 earthquake near Auckland Islands, New Zealand region — (31 km WSW)
- M4.4 earthquake near Auckland Islands, New Zealand region — (66 km NNE)
- M5.3 earthquake near Bluff, New Zealand — (176 km NNE)
- M4.5 earthquake near Bluff, New Zealand — (181 km NE)
- M6.2 earthquake near Bluff, New Zealand — (184 km NNE)
- M4.1 earthquake near Riverton, New Zealand — (185 km NNE)
Other magnitude 6 earthquakes worldwide
- M5.9 earthquake near Colonia, Micronesia —
- M5.8 earthquake near Kermadec Islands region —
- M5.9 earthquake near Kermadec Islands region —
- M5.9 earthquake near Brisas Barra de Suchiate, Mexico —
- M5.8 earthquake near Ust’-Kamchatsk Staryy, Russia —
- M5.8 earthquake near Oula Xiuma, China —
- M5.8 earthquake near Atka, Alaska —
- M5.8 earthquake near Atka, Alaska —
Questions about this earthquake
How strong is a magnitude 6.0 earthquake?
Strong earthquakes can cause significant damage in populated areas within roughly 100 km of the epicentre, particularly to older masonry buildings. Landslides and liquefaction become a real risk in susceptible ground. A magnitude 6.0 earthquake radiates roughly 15,080 tons of TNT equivalent in seismic energy.
How deep was the earthquake near Auckland Islands?
At 14 km this was a shallow earthquake. Shallow events release their energy close to the surface, so for a given magnitude they produce noticeably stronger shaking — and more damage — than deeper ones. Roughly three quarters of all earthquakes worldwide occur at shallow depths.
Was the M6.0 earthquake near Auckland Islands felt?
This catalogue does not ingest eyewitness responses, so it cannot confirm where this earthquake was felt. Based on magnitude alone, an event this size can produce strong, widely felt shaking. Its shallow focus makes stronger surface shaking more likely than for a deeper event of the same magnitude.
What does the USGS tsunami field mean for this event?
The USGS record does not carry a link to NOAA tsunami information. That field is not an all-clear and does not state whether a tsunami occurred. In this case, a damaging tsunami would be less likely because at M6.0 it falls below the magnitude 6.5 threshold that generally applies before a submarine earthquake displaces enough water to generate a damaging tsunami. For an active coastal alert, use tsunami.gov or your local warning authority.
Have there been aftershocks?
No further earthquakes have been recorded within about 150 km of the epicentre in the seven days after this event.
How often do earthquakes happen near Auckland Islands?
8 earthquakes of magnitude 4 or above have been logged within roughly 200 km of this epicentre in our catalogue. The strongest was a magnitude 6.2 event near Bluff on 29 April 2025. This M6.0 event released about 2.0 times less energy than that event.